50mm PVC enviro-sac infiltration kit - uno

The OneWaternaturally Infiltration kit is an assembly of the fittings required for a standard connection to a single Enviro-Sac product range. The kit assembly provides the fittings and where you just add your own pipe. The manifold construct using the fittings should be to a maximum invert level of 500mm or 600mm depending on the tank width.

The uno 50mm infiltration kit consists of the following:

• 1 x 100mm PVC rainhead;
• 2 x 100mm x 90o DWV elbows;
• 1 x 100mm DWV sq junction;
• 2 x 100mm powder coated saddles;
• 1 x 100mm PVC First Flush diverter kit;
• 100mm x 50 PVC tapered reducer;
• 50mm PVC FI connector;
• 50mm x 1 meter PVC grey suction hose;
• 2 off stainless hose clamps;
• 1 x 32mm threaded PVC ball valve;
• 1 x 32mm poly tail;
• 1 x 32mm poly threaded end cap;
• Australia Post delivery within Australia.

The manifold assembly starts with the inflow to the first flush diverter, followed by the enviro-sac inlet which then continues to the overflow elbow down to the existing inground drainage system. The simple first flush device has a drip bleed to empty itself of contaminated water and will reset automatically.